Stitchery Square


Needlework Supplies
Needlepoint Canvases
Order Form

Finishing Belts

Belt Measuring Information

Measure a belt from the outer tip of the buckle to the most used hole to determine the BELT SIZE. Pants size plus 2 inches will also equal the belt size. To accomodate for the leather, you should STITCH 5 inches LESS THAN THIS. For canvases with a design centered at the mid-point, divide the 5 inches in half and STITCH 2-1/2 inches LESS ON EACH END. Don't put initials within 4 inches of the end of your stitching because they will be cut off!

Two rows will be turned under on both top and bottom edges. Be sure you have stitched enough to accomodate for this: you must stitch 2 additional rows if the design comes too close to the painted edge or the belt is too narrow. Stitch additional rows in the design color(s) if possible, or in the background color(s).


Standard Solid Brass Finishing
Color choices are brown and black leather. Allow 4 weeks for finishing (except during the holiday season).


Adjustable Buckle Belt Finishing
You must stitch 6 inches MORE than your belt size (see above for determining this measurement). Leather can be dyed any color you like. Indicate gold or silver buckle. Allow up to 3 months for finishing. Cost: Please call or email us for prices.

Slide Belt

Fancy clasp with leather

Fancy clasp with soft fabric

Click here to see some different things to do with belts


Stitchery Square
PO Box 773, Camden, Maine 04843 
Phone: 207-236-9773 

Visa, Mastercard and Discover Cards Accepted 

Brought to you by  
Needlecraft Showcase
Page revised 1/17/13
Copyright 2002 Stitchery Square